Step 1: Prepare the base
Clear the surface area where the base of your grass will be placed. If used outdoors; remove anything unwanted (ex: old grass), then use your turf rake and hand tamper to smooth and compact the base surface.
Step 2: Position your grass
Once the base is prepared, it is recommended you use marking paint to visually plan out the installation of you new grass.
Step 3: Trim to size
After placing your grass in position; customize installation using a utility knife to carefully trim your grass to the desired size and shape, keeping the grain pointed in the same direction.
Step 4: Glue together seams
Align 2 pieces of grass with grain in the same direction. Once aligned, fold back edges to place seaming cloth and adhesive. Lay seaming cloth entire length of seam, then apply adhesive liberally and evenly.
Step 5: Secure in place
Secure edges by driving Landscape Stakes approximately every 6″- 8″ along perimeter. For large installations additional landscape stakes should be used to reinforce long seams and placed where needed.
Our products are built to last with little or no maintenance needed.
To clean simply use mild soap and water.
To keep out odors use Turf Infill + Pet Deodorizer.
When needed use a Turf Rake to brush bristle fibers upright.
- Seaming Cloth (for seaming 2 or more rolls together)
- Seaming Glue (1 qt. = approx. 15-ft.)
- Landscape Stakes (25 per package)
- Stiff Bristle Broom (for grass fibers)
- Hand Tamper (for outdoor apps)
- Sprinkler Caps (if needed)
- Utility Knife
- Yard Rake
- Tape Measure
- Marking Paint
- Garden Hose
- Shop Broom